Consumer medicine information

Ferrosig Injection

Iron polymaltose complex

BRAND INFORMATION

Brand name

Ferrosig Injection

Active ingredient

Iron polymaltose complex

Schedule

S4

 

Consumer medicine information (CMI) leaflet

Please read this leaflet carefully before you start using Ferrosig Injection.

What is in this leaflet?

This leaflet answers some common questions about FERROSIG INJECTION.

It does not contain all the available information.

It does not take place of talking to your doctor or pharmacist.

All medicines have risks and benefits.

Your doctor has weighed the risks of using FERROSIG INJECTION against the benefits this medicine is expected to have for you.

If you have any concerns about this medicine, ask your doctor or pharmacist.

Keep this leaflet with your medicine. You may need to read it again.

What is FERROSIG INJECTION?

The name of your medicine is FERROSIG Injection.

FERROSIG injection is an iron supplement.

It contains iron in a form that can be used by your body to build up iron reserves that are needed for your system to operate properly.

What is FERROSIG INJECTION used for?

FERROSIG INJECTION is used in cases of iron deficiency (too little iron in the system).

FERROSIG INJECTION is used when dosage by mouth is impractical, the anaemia is severe or disturbances in the gastro-intestinal tract make absorption difficult or uncertain.

FERROSIG INJECTION is also used for treating iron deficiency states discovered in the third trimester of pregnancy and in circumstances where contact between patient and doctor only occurs at irregular intervals.

Your doctor however, may have prescribed and used FERROSIG INJECTION for another reason.

Ask your doctor if you have any questions about why FERROSIG INJECTION has been prescribed for you. A doctor's prescription is required for FERROSIG INJECTION.

Before you are given FERROSIG INJECTION

When you must not be given it:

Do not use FERROSIG INJECTION if you have ever had an allergic reaction to:

  1. FERROSIG INJECTION or other iron preparations.
  2. any of the other ingredients in FERROSIG.

You must tell your doctor if:

  1. You have had an allergic reaction to iron supplements.
Some of the symptoms of an allergic reaction may include skin rash and itching. Other reactions may include nausea, vomiting and diarrhoea.
There have been reports of hypersensitivity reactions which progressed to Kounis syndrome (acute coronary arteriospasm that can result in myocardial infarction).
  1. You are allergic to any other medicines or any foods, dyes or preservatives.
  2. You have any other medical conditions or health problems including:
Liver and/or kidney problems, Bronchial asthma, arthritis, heart disease
  • Allergies
  • Infections
  1. you are pregnant or intend to become pregnant.
Foetal bradycardia may occur following administration of parenteral irons. It is usually transient and a consequence of a hypersensitivity reaction in the mother. The unborn baby should be carefully monitored during administration of parenteral irons to pregnant women.
Like most medicines, FERROSIG INJECTION is not recommended in the first trimester of pregnancy. Your doctor will discuss the possible risks and benefits of using FERROSIG INJECTION during pregnancy.

If you have not told your doctor about any of the above, tell them before you are given any FERROSIG INJECTION.

When you must not be given FERROSIG INJECTION

  1. If the ampoule contents are discoloured or show signs of visible sedimentation.
  2. After the expiry date printed on the pack has passed.
The medication may have no effect at all, or worse, it may give an entirely unexpected effect if you use it after the expiry date.

Taking other medicines

Tell your doctor if you are taking any other medicines, including medicines that you buy without a prescription from a pharmacy, supermarket or health food shop.

Some medicines may interact with FERROSIG INJECTION.

These include:

  • Drugs that are used to treat heart disease and high blood pressure known as ACE inhibitors (e.g. captopril, enalapril, fosinopril, lisinopril or quinalapril).
  • Oral iron supplements.

Your doctor or pharmacist has more information on medicines to avoid while taking FERROSIG INJECTION.

How FERROSIG INJECTION is given

FERROSIG INJECTION is given in a prescribed manner into the muscle.

The injection technique is well defined and must be adhered to.

Failure to inject as recommended could result in persistent staining of the skin.

FERROSIG INJECTION should never be injected into the arm or other exposed areas.

Your doctor has detailed information on the correct injection technique.

FERROSIG INJECTION may also be administered intravenously. This should only be done by a doctor in a hospital.

How much to inject

The dose of FERROSIG INJECTION is determined by the amount of iron found in your system using a blood test.

Your doctor has information on the correct dosage requirement for different haemoglobin or iron levels.

Your doctor will decide what dose and how you are administered FERROSIG INJECTION.

How long to use it

Your doctor will tell you how long the course of FERROSIG INJECTION will last.

While you are using FERROSIG INJECTION

Things you must do

Tell your doctor if:

  • Your symptoms do not improve within a few days, or if they become worse.
  • You develop any form of skin rash and/or itching or difficulty in breathing while using FERROSIG INJECTION.
  • You become pregnant while using FERROSIG INJECTION.

If you have to get any blood or urine tests done tell your doctor and nurse that you are using FERROSIG INJECTION.

Tell any doctor, dentist and pharmacist who are treating you that you are on a course of FERROSIG INJECTION.

Tell your doctor if you feel that FERROSIG INJECTION is not helping your condition.

Tell your doctor if, for any reason, FERROSIG INJECTION has not been used exactly as prescribed. Otherwise, your doctor may think that it was not effective and change your treatment unnecessarily.

Things you must not do

Do not take any oral iron supplements while using FERROSIG INJECTION.

Side Effects or Adverse Reactions

Tell your doctor or pharmacist if you do not feel well while you are using FERROSIG INJECTION.

FERROSIG INJECTION helps most people with low haemoglobin (or iron) but it may have some unwanted side effects in a few people.

Side effects that have been reported by people using FERROSIG INJECTION include:

  • Kounis syndrome - frequency not known.
  • In pregnancy, associated foetal bradycardia may occur with parenteral iron preparations.
  • Pain at site of injection
  • Local redness or swelling at the injection site
  • Lower quadrant abdominal pain
  • Headache
  • Nausea, vomiting
  • Joint and muscle pains
  • Faintness, sweating, flushing
  • Difficulty breathing
  • Dizziness on standing from a sitting position.

Some adverse reactions can be delayed and these may include:

  • Sensation of stiffening of the arms, legs or face
  • Chest and back pain
  • Faintness
  • Chills, fever, rash
  • hypophosphataemia including hypophosphataemic osteomalacia

Incorrect injection technique could result in staining of the skin.

FERROSIG INJECTION may cause other side effects. If you have any other side effects, check with your doctor.

Do not be alarmed by this list of possible side effects. You may not experience any of them.

After using FERROSIG INJECTION

Storage

Keep FERROSIG INJECTION where young children cannot reach it.

A locked cupboard at least one-and-a-half metres above the ground is a good place to store medicines.

Store FERROSIG INJECTION at below 25°C. Do not freeze. Protect from light.

Do not leave FERROSIG INJECTION in the car or on windowsills. Heat can destroy some medicines.

Disposal

If your doctor tells you to stop using FERROSIG INJECTION or it has passed its expiry date, ask your pharmacist what to do with any FERROSIG INJECTION left over.

Further Information

This is not all the information that is available on FERROSIG INJECTION. If you need more information, ask a doctor or pharmacist.

Product Description

What it looks like

FERROSIG INJECTION is a slightly viscous, dark reddish-brown liquid and is supplied in 2mL ampoules for injection. Each ampoule contains 318 mg iron polymaltose equivalent to 100 mg iron III (50 mg per mL).

Active ingredient

Iron polymaltose complex is the active ingredient in FERROSIG INJECTION.

List of inactive ingredients
Water for injections and hydrochloric acid or sodium hydroxide (for pH adjustment of the formulation).

The Australian Product Registration number for FERROSIG INJECTION is AUSTR 82435.

SPONSOR

Sigma Company Ltd
3 Myer Place, Rowville,
Victoria, 3178 Australia

CMI prepared in April 2011.

CMI updated 31 May 2022.

Published by MIMS July 2022

BRAND INFORMATION

Brand name

Ferrosig Injection

Active ingredient

Iron polymaltose complex

Schedule

S4

 

1 Name of Medicine

Iron polymaltose (AAN).

2 Qualitative and Quantitative Composition

Carton of 5 x 2 mL ampoules, with each 2 mL ampoule containing 318 mg iron polymaltose equivalent to 100 mg iron III (50 mg per mL).
For the full list of excipients, see Section 6.1 List of Excipients.

3 Pharmaceutical Form

Ferrosig Injection is an aqueous, approximately isotonic solution for intravenous and intramuscular injection. It is a slightly viscous, dark reddish-brown liquid. Free of obvious contamination.
Ferrosig Injection contains a macromolecular spherocolloidal complex of iron (III) hydroxide and the carbohydrate polymaltose. Iron polymaltose is also considered to be a complex of ferric hydroxide and isomaltose.
Each 2 mL ampoule of Ferrosig Injection contains the equivalent of 100 mg of iron. The aqueous colloidal solution is sterile, pyrogen-free and approximates the pH and tonicity of the tissues.
The excipients are water for injections and hydrochloric acid or sodium hydroxide (for pH adjustment).

4 Clinical Particulars

4.9 Overdose

Overdosage of iron causes haemosiderosis and consequent cirrhosis of the liver, diabetes and heart failure. Periodic monitoring of serum ferritin may be useful in recognising a deleterious, progressive accumulation of iron.
For information on the management of overdose, contact the Poisons Information Centre on 131126 (Australia).

5 Pharmacological Properties

5.3 Preclinical Safety Data

Genotoxicity. No data available.
Carcinogenicity. No data available.

6 Pharmaceutical Particulars

6.7 Physicochemical Properties

Chemical structure. The substance has an empirical formula of C120H220O156Fe37 and the complex has a molecular weight of 462,000.
Iron polymaltose, the active substance of Ferrosig, is a macromolecular complex in which polynuclear iron(III)-hydroxide is stabilized by polymaltose. It contains about 53% (m/m)* iron(III)-hydroxide, equivalent to about 27% (m/m) of iron, about 36% (m/m) polymaltose ligand, less than 6.4% (m/m) sodium chloride and less than 10% (m/m) of water.
*Mass fraction mass/mass.
CAS number. 53858-86-9.

7 Medicine Schedule (Poisons Standard)

Poisons Schedule: S4.

Summary Table of Changes

https://stagingapi.mims.com/au/public/v2/images/fulltablegif/FERSIGST.gif