Consumer medicine information

Pentothal For Injection

Thiopental sodium

BRAND INFORMATION

Brand name

Pentothal

Active ingredient

Thiopental sodium

Schedule

What is in this leaflet

This leaflet answers some common questions about Pentothal for Injection.

It does not contain all the available information. It does not take the place of talking to your doctor or pharmacist.

All medicines have risks and benefits. Your doctor has weighed the risks of you taking Pentothal for Injection against the benefits they expect it will have for you.

If you have any concerns about taking this medicine, ask your doctor or pharmacist.

Keep this leaflet. You may need to read it again.

What Pentothal for Injection is used for

Pentothal for Injection is used as a general anaesthetic, or to make you sleepy before using another anaesthetic agent, or to control seizures.

This medicine belongs to a group of medicines called barbiturates.

This medicine works as a short acting depressant of the nervous system, which is composed of the brain and spinal cord. It creates a sleep like state and loss of consciousness to prevent pain and discomfort during surgery.

Ask your doctor if you have any questions about why this medicine has been prescribed for you. Your doctor may have prescribed it for another reason.

Thiopental is addictive.

Before you are given Pentothal for Injection

When you must not be given it

You should not be given Pentothal for Injection if you have an allergy to:

any other barbiturates
any medicine containing thiopental sodium
any of the ingredients listed at the end of this leaflet.

Some of the symptoms of an allergic reaction may include:

shortness of breath
wheezing or difficulty breathing
swelling of the face, lips, tongue or other parts of the body
rash, itching or hives on the skin

If you are not sure whether you should be given this medicine, talk to your doctor.

You should not be given Pentothal for Injection if you have:

porphyria
a swollen jaw, mouth or neck

Before you are given it

Tell your doctor if you have allergies to any other medicines, foods, preservatives or dyes.

Tell your doctor if you have or have had any of the following medical conditions:

low blood pressure
liver or kidney disease
heart problems

Tell your doctor if you are pregnant or plan to become pregnant or are breast-feeding. Your doctor can discuss with you the risks and benefits involved.

If you have not told your doctor about any of the above, tell him/her before you start taking Pentothal for Injection.

Taking other medicines

Tell your doctor or pharmacist if you are taking any other medicines, including any that you get without a prescription from your pharmacy, supermarket or health food shop.

Some medicines and Pentothal for Injection may interfere with each other. These include:

medicines used to treat gout, such as probenacid
medicines used to widen blood vessels and decrease in blood pressure, such as diazoxide
medicines to relieve breathing problems, such as aminophylline
ethanol (alcohol)
medicines used as sedatives or to treat anxiety, such as benzodiazepines
medicines used to depress the nervous system which is composed of the brain and spinal cord
medicines used to treat pain relief, such as opioids analgesics
medicines used to help the kidneys get rid of salt and water by increasing the amount of urine produced, such as diuretics
ketamine, an anaesthetic
magnesium sulfate
medicines used to treat mental illness or psychotic conditions and to relieve severe nausea and vomiting, such as phenothiazine
iodine for thyroid problems

These medicines may be affected by Pentothal for Injection or may affect how well it works. You may need different amounts of your medicines, or you may need to take different medicines.

Your doctor and pharmacist have more information on medicines to be careful with or avoid while taking this medicine.

How to take Pentothal for Injection

Follow all directions given to you by your doctor or pharmacist carefully. They may differ from the information contained in this leaflet.

How much is given

Your doctor will decide how much you will receive. The dosage will depend on your condition and other factors such as weight, sex and age.

How it is given

Thiopental is given by intravenous injection.

If you are given too much (overdose)

As Pentothal for Injection is given to you under the supervision of your doctor, it is very unlikely that you will receive too much. However, if you experience any severe side effects after being given Pentothal for Injection, tell your doctor immediately or go to Accident and Emergency at the nearest hospital. You may need urgent medical attention.

In case of overdose, immediately contact the Poisons Information Centre for advice (telephone 13 11 26).

Symptoms of Pentothal for Injection overdose include the side effects listed below in the ‘Side Effects’ section, but are usually of a more severe nature.

While you are being given Pentothal for Injection

Things you must do

If you are about to be started on any new medicine, remind your doctor and pharmacist that you have been given Pentothal for Injection.

Tell any other doctors, dentists, and pharmacists who treat you that you have been given this medicine.

If you become pregnant while taking this medicine, tell your doctor immediately.

If you are about to have any blood tests, tell your doctor that you have been given this medicine. It may interfere with the results of some tests.

Keep all of your doctor’s appointments so that your progress can be checked.

Things to be careful of

Be careful driving or operating machinery until you know how Pentothal for Injection affects you. This medicine may affect alertness and tasks requiring co-ordination in some people. If you have any of these symptoms, do not drive, operate machinery or do anything else that could be dangerous.

Be careful when drinking alcohol while you are being given this medicine. If you drink alcohol, impairment of motor skills may be worse.

If you feel light-headed, dizzy or faint when getting out of bed or standing up, get up slowly. Standing up slowly, especially when you get up from bed or chairs, will help your body get used to the change in position and blood pressure. If this problem continues or gets worse, talk to your doctor.

Some self help measures suggested below may help your condition. Your doctor or pharmacist can give you more information about these measures.

Side effects

Tell your doctor or pharmacist as soon as possible if you do not feel well after you have been given Pentothal for Injection. This medicine helps most people, but it may have unwanted side effects in a few people. All medicines can have side effects. Sometimes they are serious, most of the time they are not. You may need medical attention if you get some of the side effects.

Do not be alarmed by the following lists of side effects. You may not experience any of them.

Ask your doctor or pharmacist to answer any questions you may have.

Tell your doctor or pharmacist if you notice any of the following and they worry you:

involuntary muscle movements
coughing
hiccups
sneezing
shivering

Tell your doctor as soon as possible if you notice any of the following:

allergic reactions, including sudden life-threatening allergic reactions
itchy rash
shallow breathing
changes in heart rate (fast, slow or irregular)
prolonged sleepiness or recovery
low blood pressure
difficulty in breathing

The above list includes serious side effects that may require medical attention.

Tell your doctor or pharmacist if you notice anything that is making you feel unwell.

Other side effects not listed above may also occur in some people.

After using Pentothal for Injection

Storage

Pentothal for Injection will be stored in the pharmacy or on the ward. The injection should be stored below 25°C.

Product description

What it looks like

Pentothal for Injection is a yellowish powder available as 500 mg vials in packs of 25 and 50*.

*not all pack sizes are marketed.

Ingredients

Pentothal for Injection contains 500 mg of thiopental sodium as the active ingredient.

Pentothal for Injection also contains the following inactive ingredient:

anhydrous sodium carbonate

This medicine does not contain lactose, sucrose, gluten, tartrazine or any other azo dyes.

Sponsor

Pentothal for Injection is supplied by:

Australian Sponsor:
Link Medical Products Pty Ltd
5 Apollo Street
Warriewood
NSW 2102

Pentothal for Injection is available in the following strengths:
500 mg powder for injection vial
AUST R 73505

This leaflet was updated in December 2020.

Published by MIMS February 2021

BRAND INFORMATION

Brand name

Pentothal

Active ingredient

Thiopental sodium

Schedule

1 Name of Medicine

Thiopental sodium.

2 Qualitative and Quantitative Composition

Each vial contains 500 mg of thiopental sodium.

3 Pharmaceutical Form

Powder for injection.
Thiopental sodium is a yellowish hygroscopic powder stabilised with anhydrous sodium carbonate 60 mg/g thiopental sodium.

4 Clinical Particulars

4.1 Therapeutic Indications

As the sole anaesthetic agent for brief surgical procedures.
Induction of anaesthesia prior to the administration of other anaesthetic agents.
Short-term control of convulsive states.
Supplement to regional anaesthesia or low potency agents such as nitrous oxide.

4.2 Dose and Method of Administration

Pentothal for injection is administered by the intravenous route only. Individual response to the drug is so varied that there can be no fixed dosage. The drug should be titrated against patient requirements as governed by age, sex and bodyweight. Younger patients require relatively larger doses than middle aged and elderly people; the latter metabolise the drug more slowly. Prepuberty requirements are the same for both sexes, but adult females require less than adult males. Dose is usually proportional to bodyweight and obese patients require a larger dose than relatively lean people of the same weight.
The use of a continuous infusion increases the likelihood of overdosage, with a subsequent prolonged recovery period. Cloudy solutions or solutions showing a precipitate should not be administered.

Premedication.

Premedication usually consists of atropine or hyoscine to suppress vagal reflexes and inhibit secretions. Ideally, the peak effect of these medications should be reached shortly before the time of induction.

Test dose.

It is advisable to inject a small test dose of Pentothal for injection 25 to 75 mg (1 to 3 mL of a 25 mg/mL solution) to assess tolerance or unusual sensitivity to Pentothal for injection, and pause to observe patient reaction for at least 60 seconds.
If unexpectedly deep anaesthesia develops or if respiratory depression occurs, consider these possibilities:
the patient may be unusually sensitive to Pentothal for injection;
the solution may be more concentrated than had been assumed;
or the patient may have received too much premedication.

Use in anaesthesia.

Moderately slow induction can usually be accomplished in the average adult by injection of 50 to 75 mg (2 to 3 mL of a 25 mg/mL solution) at intervals of 20 to 40 seconds, depending on the reaction of the patient. Once anaesthesia is established, additional injections of 25 to 50 mg can be given whenever the patient needs. Slow injections are recommended to minimise respiratory depression and the possibility of overdosage. The smallest dose consistent with attaining the surgical objective is the desired goal. Momentary apnoea following each injection is typical, and a progressive decrease in the amplitude of respiration appears with increasing dosage. Pulse remains normal or increases slightly and returns to normal. Muscles usually relax about 30 seconds after unconsciousness is attained, but this may be masked if a skeletal muscle relaxant is used. The tone of jaw muscles is a fairly reliable index. The pupils may dilate but later contract; sensitivity to light is not usually lost until a level of anaesthesia deep enough to permit surgery is attained. Nystagmus and divergent strabismus are characteristic during early stages, but at the level of surgical anaesthesia, the eyes are central and fixed. Corneal and conjunctival reflexes disappear during surgical anaesthesia. When Pentothal for injection is used for induction in balanced anaesthesia with a skeletal muscle relaxant and an inhalation agent, the total dose of Pentothal for injection can be estimated and then injected in two to four fractional doses. With this technique, brief periods of apnoea may occur which may require assisted or controlled pulmonary ventilation. As an initial dose, Pentothal for injection 210 to 280 mg (3 to 4 mg/kg) is usually required for rapid induction in the average adult (70 kg). When Pentothal for injection is used as the sole anaesthetic agent, the desired level of anaesthesia can be maintained by injection of small repeated doses as needed or by using a continuous intravenous drip in a 2 or 4 mg/mL concentration. (Sterile water should not be used as the diluent in these concentrations, since haemolysis will occur.) With a continuous drip, the depth of anaesthesia is controlled by adjusting the rate of infusion.

Use in convulsive states.

For the control of convulsive states following anaesthesia (inhalation or local) or other causes, 75 to 125 mg (3 to 5 mL of a 25 mg/mL solution) should be given as soon as possible after the convulsion begins. Convulsions following the use of a local anaesthetic may require Pentothal for injection 125 to 250 mg given over a ten minute period. If the convulsion is caused by a local anaesthetic, the required dose of thiopental sodium will depend upon the amount of local anaesthetic given and its convulsant properties.

Use in neurosurgical patients with increased intracranial pressure.

In neurosurgical patients, intermittent bolus injections of 1.5 to 3.5 mg/kg bodyweight may be given to reduce intraoperative elevations of intracranial pressure if adequate ventilation is provided.

Management of some complications.

Respiratory depression (hypoventilation, apnoea), which may result from either unusual responsiveness to Pentothal for injection or overdosage, is managed as stated above. Pentothal for injection should be considered to have the same potential for producing respiratory depression as an inhalation agent, and patency of the airway must be protected at all times.
Laryngospasm may occur with light Pentothal for injection narcosis at intubation, or in the absence of intubation if foreign matter or secretions in the respiratory tract create irritation. Laryngeal and bronchial vagal reflexes can be suppressed, and secretions minimised by giving atropine or hyoscine premedication and a barbiturate or opiate. Use of a skeletal muscle relaxant or positive pressure oxygen will usually relieve laryngospasm. Tracheostomy may be indicated in difficult cases.
Myocardial depression, proportional to the amount of drug in direct contact with the heart, can occur and may cause hypotension, particularly in patients with an unhealthy myocardium.
Arrhythmias may appear if pCO₂ is elevated, but they are uncommon with adequate ventilation. Management of myocardial depression is the same as for overdosage. Pentothal for injection does not sensitise the heart to adrenaline or other sympathomimetic amines.
Extravascular infiltration should be avoided. Care should be taken to ensure that the needle is within the lumen of the vein before injection of Pentothal for injection. Extravascular injection may cause chemical irritation of the tissues varying from slight tenderness to venospasm, extensive necrosis and sloughing. This is due primarily to the high alkaline pH (10 to 11) of clinical concentrations of the drug. If extravasation occurs, the local irritant effects can be reduced by injection of procaine (2%) 20 mg/mL locally to relieve pain and enhance vasodilatation. Local application of heat also may help to increase local circulation and removal of the infiltrate.
Intra-arterial injection can occur inadvertently, especially if an aberrant superficial artery is present at the medial aspect of the antecubital fossa. The area selected for intravenous injection of the drug should be palpated for detection of an underlying pulsating vessel. Accidental intra-arterial injection can cause arteriospasm and severe pain along the course of the artery with blanching of the arm and fingers. Appropriate corrective measures should be instituted promptly to avoid possible development of gangrene. Any patient complaint of pain warrants stopping the injection. Methods suggested for dealing with this complication vary with the severity of symptoms. The following have been suggested. Dilute the injection of Pentothal for injection by removing the tourniquet and any restrictive garments. Leave the needle in place, if possible. Inject the artery with a dilute solution of papaverine 40 to 80 mg or 5 mL of procaine (2%) 20 mg/mL, to inhibit smooth muscle spasm. If necessary, perform sympathetic block of the brachial plexus and/or stellate ganglion to relieve pain and assist in opening collateral circulation. Papaverine can be injected into the subclavian artery, if desired. Unless otherwise contraindicated, institute immediate heparinisation to prevent thrombus formation. Consider local infiltration of an alpha-adrenergic blocking agent such as phentolamine into the vasospastic area. Provide additional symptomatic treatment as required.
Shivering after Pentothal for injection anaesthesia, manifested by twitching face muscles and occasional progression to tremors of the arms, head, shoulders and body, is a thermal reaction due to increased sensitivity to cold. Shivering appears if the room environment is cold and if a large ventilatory heat loss has been sustained with balanced inhalation anaesthesia employing nitrous oxide. Treatment consists of warming the patient with blankets and maintaining room temperature near 22°C (72°F).

Preparation of solutions.

Pentothal for injection is supplied as a yellowish, hygroscopic powder. Solutions should be prepared aseptically with one of the three following diluents: Water for Injections BP, Sodium Chloride Injection BP 9 mg/mL (0.9%) or Glucose Injection BP 50 mg/mL (5%).
Clinical concentrations used for intermittent intravenous administration vary between 20 and 50 mg/mL. (See Table 1.) A 20 or 25 mg/mL solution is most commonly used. A 34 mg/mL concentration in water for injections is isotonic; concentrations less than 20 mg/mL in this diluent are not used because they cause haemolysis.
For continuous intravenous drip administration, concentrations of 2 or 4 mg/mL are used. Solutions may be prepared by adding Pentothal for injection to Glucose Injection BP 50 mg/mL (5%), Sodium Chloride Injection BP 9 mg/mL (0.9%) or Normosol R pH 7.4. See Table 1.

Since Pentothal for injection contains no added bacteriostatic agent, extreme care in preparation and handling should be exercised at all times to prevent the introduction of microbial contaminants. Injection of air into the solution should be avoided because this may hasten the development of cloudiness. Solutions should be freshly prepared and used promptly and inspected visually for particulate matter and discolouration, whenever solution and container permit. To reduce microbiological hazard, use as soon as possible after reconstitution. If storage is necessary, hold at 2-8°C, for not more than 24 hours. Sterilisation by heating should not be attempted.

4.3 Contraindications

Absolute.

Complete absence of suitable veins.
Allergy or hypersensitivity to barbiturates.
Status asthmaticus or when an adequate airway cannot be maintained during operation.
Latent or manifest porphyria.
Constrictive pericarditis.
Severe respiratory embarrassment.
Variegate or acute intermittent porphyria.
Inflammatory conditions of the mouth, jaw and neck.

Relative.

Severe cardiovascular disease, hypotension or shock, and conditions in which the hypnotic effect may be prolonged or potentiated, i.e. excessive premedication.
Addison's disease.
Hepatic or renal dysfunction.
Myxoedema.
Increased blood urea.
Severe anaemia.
Myasthenia gravis.

4.4 Special Warnings and Precautions for Use

This medicine should be administered only by persons qualified in the use of intravenous anaesthetics. A person competent in anaesthesia management should be in constant attendance and adequate facilities for support of respiration and circulation should be available when thiopental sodium for injection is being used.
Avoid extravasation or intra-arterial injection.
Thiopental sodium for injection should be administered with caution to patients with pre-existing hypotension or in conditions where the hypnotic effect may be prolonged or intensified, such as in the presence of hepatic disease and renal disease.
Respiratory depression may result from either an unusual responsiveness to thiopental sodium or an overdosage. Therefore, it should not be administered without the ready availability of resuscitative equipment including that necessary for endotracheal intubation. In this regard, thiopental sodium should be considered to have the same potential as an inhalation anaesthetic, and patency of the airway must be protected at all times.
Observe aseptic precautions at all times in the preparation and handling of thiopental sodium solutions.
Special care should be exercised under the following circumstances; if used in these conditions reduce the dose and administer slowly.
Moderate degree of hypotension from any cause including shock.
Conditions in which the hypnotic effect will be prolonged: excessive premedication, hepatic and renal dysfunction, increased blood urea, severe anaemia, Addison's disease and myxoedema.
Severe cardiovascular disease including peripheral circulatory failure, also increased intracranial pressure, asthma, myasthenia gravis, severe uraemia, endocrine insufficiency (pituitary, thyroid, adrenal, pancreas), muscular dystrophies and myotonias.
Debilitated patients.

Use in the elderly.

Following administration of barbiturate anaesthetics to elderly patients for short (outpatient) procedures, recovery of cognitive and psychomotor functions is generally slower than in younger patients. The percentage of plasma bound drug decreases and the volume of distribution and half-life increase in the aged patient. Elderly patients are also more likely to have age related hepatic function impairment, which may require reduction of dosage in patients receiving barbiturate anaesthetics.

Paediatric use.

Appropriate studies on the relationship of age to the effects of barbiturate anaesthetics have not been performed in the paediatric population. Paediatric populations have demonstrated a lower percentage protein binding than in adults. The half-life may be increased in the neonate. No paediatric specific problems have been documented to date.

Paediatric neurotoxicity.

Some published studies in children have observed cognitive deficits after repeated or prolonged exposures to anaesthetic agents early in life. These studies have substantial limitations, and it is not clear if the observed effects are due to the anaesthetic/analgesic/sedation drug administration or other factors such as the surgery or underlying illness.
Published animal studies of some anaesthetic/analgesic/sedation drugs have reported adverse effects on brain development in early life and late pregnancy.
The clinical significance of these nonclinical finding is yet to be determined with inhalation or infusion of such drugs, exposure is longer than the period of inhalation or infusion. Depending on the drug and patient characteristics, as well as dosage, the elimination phase may be prolonged relative to the period of administration.

Effect on laboratory tests.

Thiopental sodium may decrease thyroid uptake of sodium iodide (I¹²³ and I¹³¹) and sodium pertechnetate (Tc^99m).

4.5 Interactions with Other Medicines and Other Forms of Interactions

Table 2 lists the effects of interactions between Pentothal for injection and other medicines.

4.6 Fertility, Pregnancy and Lactation

Effects on fertility.

No data available.
(Category A¹)
¹Category A: Drugs which have been taken by a large number of pregnant women and women of childbearing age without any proven increase in the frequency of malformations or other direct or indirect harmful effects on the fetus having been observed.
Thiopental sodium readily crosses the placental barrier. The concentration in cord vein blood is at its maximum two to three minutes after an intravenous dose is administered to the mother. The fetal blood level is related to maternal blood level but is considerably lower. Animal reproduction studies have not been conducted with thiopental sodium. It is also not known whether thiopental sodium can cause fetal harm when administered to a pregnant woman or can affect reproductive capacity. Thiopental sodium should be given to a pregnant woman only if clearly needed.
Published animal studies of some anaesthetic/analgesic/sedation drugs have reported adverse effects on brain development in early life and late pregnancy.
Published studies in pregnant and juvenile animals demonstrate that the use of anaesthetic/analgesic and sedation drugs that block NMDA receptors and/or potentiate GABA activity during the period of rapid brain growth or synaptogenesis may result in neuronal and oligodendrocyte cell loss in the developing brain and alterations in synaptic morphology and neurogenesis when used for longer than 3 hours. These studies included anaesthetic agents from a variety of drug classes.
Small amounts of thiopental sodium may appear in the milk of breastfeeding mothers following administration of large doses.

4.7 Effects on Ability to Drive and Use Machines

Patients should be advised of possible adverse effects on their ability to drive or perform other tasks requiring alertness and coordination. Impairment of psychomotor skills may occur following barbiturate anaesthesia and may persist for varying lengths of time (usually about 24 hours) depending upon the anaesthetic and/or combination of medications used and the total dosages administered.

4.8 Adverse Effects (Undesirable Effects)

Hypersensitivity reactions to barbiturates including thiopental sodium have been reported.
Adverse effects include respiratory depression, myocardial depression, cardiac arrhythmias, prolonged somnolence and recovery, hypotension, tachycardia, sneezing, coughing, bronchospasm, laryngospasm and shivering.
Anaphylactoid reactions to thiopental sodium have been reported. Symptoms, e.g. urticaria, bronchospasm, vasodilatation and oedema, should be managed by conventional means.
Excitatory phenomena such as involuntary muscle movements, coughing and hiccups have been reported.
Rarely, immune haemolytic anaemia with renal failure and radial nerve palsy have been reported.

Reporting suspected adverse effects.

Reporting suspected adverse reactions after registration of the medicinal product is important. It allows continued monitoring of the benefit-risk balance of the medicinal product. Healthcare professionals are asked to report any suspected adverse reactions at www.tga.gov.au/reporting-problems.

4.9 Overdose

Symptoms.

Overdosage may occur from too rapid or repeated injections. Too rapid injection may be followed by an alarming fall in blood pressure even to shock levels. Apnea, occasional laryngospasm, coughing and other respiratory difficulties with excessive or too rapid injections may occur.

Treatment.

In the event of suspected or apparent overdosage, the drug should be discontinued, a patent airway established (intubate if necessary) or maintained and oxygen should be administered, with assisted ventilation if necessary. The lethal dose of barbiturates varies and cannot be stated with certainty. Lethal blood levels may be as low as 1 mg/100 mL for short acting barbiturates, less if other depressant drugs or alcohol are also present. Cardiovascular collapse may also occur and treatment should be directed toward supporting the blood pressure and using volume expansion and/or vasopressor agents, as appropriate.
For information on the management of overdose, contact the Poisons Information Centre on 131126 (Australia).

5 Pharmacological Properties

5.1 Pharmacodynamic Properties

Mechanism of action.

Thiopental sodium is an ultrashort acting depressant of the central nervous system which induces hypnosis and anaesthesia, but not analgesia. It produces hypnosis within 30 to 40 seconds of intravenous injection. Consciousness returns after 20 to 30 minutes of a single induction dose. Recovery after a small dose is rapid, with some somnolence and retrograde amnesia.
The mechanism by which barbiturate anaesthetics produce general anaesthesia is not completely understood. It has been proposed that they act by enhancing responses to gamma-aminobutyric acid (GABA), diminishing glutamate responses, and directly depressing excitability by increasing membrane conductance, thereby producing a net decrease in neuronal excitability to provide anaesthetic action.
As sedative hypnotics, the barbiturates appear to act at the level of the thalamus where they inhibit ascending conduction in the reticular formation, thus interfering with the transmission of impulses to the cortex. Thiopental sodium reduces intracranial pressure. It has a dose related depression of respiratory and laryngeal reflexes.
Thiopental sodium depresses the myocardium and cardiac output decreases as the plasma concentration of the drug rises. Cardiac irritability is unaffected.
Respiration is markedly depressed by thiopental sodium. Following a few deep breaths, a short period of apnoea is common, respiration being resumed with a diminished rate and depth. The degree of respiratory depression depends on the dose of thiopental sodium administered and the speed of administration.
Thiopental sodium may decrease lower oesophageal sphincter tone.
Patients may experience a taste sensation of garlic after thiopental sodium is administered but before the onset of anaesthesia.

Clinical trials.

No data available.

5.2 Pharmacokinetic Properties

Repeated intravenous doses lead to prolonged anaesthesia because fatty tissues act as a reservoir. They accumulate thiopental sodium in concentrations 6 to 12 times greater than the plasma concentration and then release the drug slowly to cause prolonged anaesthesia. The half-life of the elimination phase after a single intravenous dose is three to eight hours. The distribution and fate of thiopental sodium (as with other barbiturates) is influenced chiefly by its lipid solubility (partition coefficient), protein binding and extent of ionisation. Thiopental sodium has a partition coefficient of 580. Approximately 80% of the drug in the blood is bound to plasma protein. Thiopental sodium is largely degraded in the liver and to a smaller extent in other tissues, especially the kidneys and brain. Concentration in spinal fluid is slightly less than in the plasma. Biotransformation products of thiopental sodium are pharmacologically inactive and mostly excreted in the urine. Barbiturates may precipitate acute porphyria in susceptible patients by enhancing porphyrin synthesis.

5.3 Preclinical Safety Data

Genotoxicity.

No data available.

Carcinogenicity.

No data available.

6 Pharmaceutical Particulars

6.1 List of Excipients

None.

6.2 Incompatibilities

Any solutions of Pentothal for Injection with a visible precipitate should not be administered. The stability of Pentothal for Injection solutions depends upon several factors including the diluent, temperature of storage, and the amount of carbon dioxide from room air that gains access to the solution. Any factor or condition which tends to lower pH (increase acidity) of Pentothal for Injection solutions will increase the likelihood of precipitation of thiopental acid. Such factors include the use of diluents that are too acid and the absorption of carbon dioxide which can combine with water to form carbonic acid. Solutions of suxamethonium, tubocurarine or other drugs which have an acid pH should not be mixed with Pentothal for Injection solutions. The most stable solutions are those kept under refrigeration and tightly stoppered. The presence or absence of a visible precipitate offers a practical guide to the physical compatibility of prepared solutions of Pentothal for Injection.

6.3 Shelf Life

3 years.

6.4 Special Precautions for Storage

Store below 25°C.

6.5 Nature and Contents of Container

Pentothal for Injection, 500 mg/ 20 mL, powder for injection.
Glass vials, 500 mg: pack of 25 and 50.

6.6 Special Precautions for Disposal

In Australia, any unused medicine or waste material should be disposed of in accordance with local requirements.

6.7 Physicochemical Properties

Chemical name: sodium 5-ethyl-5-(1-methylbutyl)-2- thiobarbiturate.
Thiopental sodium is a thiobarbiturate, the sulfur analogue of pentobarbitone sodium. It has a pKa of 7.4.

Chemical structure.

The empirical formula of thiopental sodium is C₁₁H₁₇N₂NaO₂S and its molecular weight is 264.32.

Log in

Consumer medicine information

Pentothal For Injection

Thiopental sodium

Keep track of your medicines

BRAND INFORMATION